Manual control menu:
Pre
ss the “
MENU
” butto
n to enter the settings menu.
P
ress “
UP
” and “
DOWN
”
buttons to navigate through various setting functions.
Press
“
ENTER
”
button to confirm the desired setting.
Menu
Function
Description
Addr
A001 - A512
DMX address settings
rPan
Yes/NO
Pan reverse
rtil
Yes/NO
Tilt reverse
Autx
Aut0
–
Aut4
Auto effects (Aut4 is 180° forward lock function)
SP00 - SP99
Auto effect speed - slow to fast
SoUn
SoU1
–
SoU4
Sound active modes (SoU4 is 180° forward lock function)
SU1 - SU99
Sound active mode sensitivity
–
low to high
rset
RESET
Reset unit to factory settings
DMX mode:
The MHS-100G can be controlled by DMX signal, simply connect the DMX signal source to the DMX input
on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the
“
UP
”
and
“
DOWN
”
buttons and
“
ENTER
”
. The A on the LED display will begin
to flash once it
’
s received the DMX signal from the controller. This unit has 14 DMX channels as indicated
in the table below:
Channel
Function
DMX value and description
1
PAN
0-255 PAN adjust 0-540°
2
Tilt
0-255 Tilt adjust 0-270°
3
Pan/Tilt fine
0-255 Pan/Tilt fine adjust
4
RGBW dimmer
0-255 (0-100%)
5
40W White dimmer
0-255 (0.100%)
6
40W White strobe
0-255 (slow to fast)
7
Colour
0-015 White, 016-023 Colour 1, 024-031 Colour 2, 032-039 Colour 3
continued until 120-127 Colour 14, 128-189 Forward rotate (slow to
fast), 190-193 Stop, 194-255 Reverse rotate (slow to fast)
8
GOBOs
0-015 White, 016-031 Gobo1, 032-047 Gobo2 continued until 112-
127 Gobo7, 128-189 Forward rotate (slow to fast), 190-193 Stop,
194-255 Reverse rotate (slow to fast)
9
Red wash
0-255 (0-100%)
10
Green wash
0-255 (0-100%)
11
Blue wash
0-255 (0-100%)
12
White wash
0-255 (0-100%)
13
Wash strobe
000 No strobe, 001-255 slow to fast
14
Special
0-199 No function, 200-209 Reset, 210-239 No function, 240-255
Sound active mode
