option
166-255 Trace option, range from big to small
CH18
Trace speed
0-255 Trace speed from slow to fast
CH19
Gobo wheel
0-255 Laser gobos wheel change
CH20
Inner dynamic
effect
0-1
No function
3-183
Inner dynamic effect single option, 2 datas as one effect,
speed and colour controlled by CH21
184-248
Inner dynamic effect group option, 5 datas as one effect,
speed and colour controlled by CH21
249-255 Random auto, speed and colour controlled by CH21
CH21
Inner dynamic
effect speed
0-127 Speed from fast to slow by inner programme
128-255 Speed from fast to slow by DMX controller
Specifications:
Power supply
110-240Vac, 50/60Hz (IEC)
Power consumption
40W (max)
Fuse rating
F2A
Laser power
1500mW
Laser Class
3B
DMX channels
7/21
LED power
6x 3W RGBW
Modes
Auto/Sound/DMX512/Master-Slave
Connections
IEC power, DMX in/out (XLR), Laser key
Dimensions
210 x 217 x 235mm
Weight
2.1kg
Troubleshooting:
No power (mains)
Check mains voltage is correct and outlet is switched on
Check IEC lead and fuse (if fuse continually blows, refer to your
dealer)
No laser or light
output
Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Check laser key on rear panel is turned on
Unresponsive to DMX
Check that unit is in DMX mode and ensure the A on the DMX
address flashes to confirm it
’
s receiving a DMX signal
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/
cutting out
Ensure adequate ventilation and unit is not too close to a heat
source
