Menu
Function
Description
A001
A001 - A512
DMX address settings
A1
A1 1 - A1 9
Auto-run mode - slow to fast
S1
S1 1 - S1 9
Sound activation mode 1
–
less to more sensitive
S2
S2 1 - S2 9
Sound activation mode 2
–
less to more sensitive
DMX mode:
The Gobo Fireflash can be controlled by DMX signal, simply connect the DMX signal source to the DMX
input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by
looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm
the correct start address by using the
“
UP
”
and
“
DOWN
”
buttons and
“
ENTER
”
. The A on the LED
display will begin to flash once it
’
s received the DMX signal from the controller. This unit has 14 DMX
channels as indicated in the table below:
Channel Function
DMX Value
Description
1
Motor
0-255
0-9 no rotation, 10-127 forward rotation from slow
to fast, 128-255 reverse rotation fast to slow
2
Master dimmer 0-255
Linear dimming from low to high
3
Strobe
0-9
None
10-255
Slow to fast
4
RP Gobo
0-255
Red and pink gobos from low to high
5
G Gobo
0-255
Green gobos from low to high
6
BY Gobo
0-255
Blue and yellow gobos from low to high
7
W Gobo
0-255
White gobo from low to high
8
R Mirror
0-255
Red mirrorball from low to high
9
G Mirror
0-255
Green mirrorball from low to high
10
B Mirror
0-255
Blue mirrorball from low to high
11
R Laser
0-255
Red laser show on/off
12
G Laser
0-255
Green laser show on/off
13
W Strobe
0-255
White strobe slow to fast
14
Macro Mode
0-50
Blank
51-255
Autorun full program
Specifications:
Power supply
110-240Vac, 50/60Hz (IEC)
Power consumption
50W
Fuse rating
F2AL, 5x20mm
Light source
Gobo 6x3W RGBPYW, Ball 3x3W RGB, Strobe
20W, Laser 120mW-red & 30mW-green
DMX channels
14
Dimensions
130x180x140mm (Without bracket)
Weight
1.4kg
Troubleshooting: