Qtx FH-650, User Manual

Page: 2 / 6

160.474UK User Manual
Introduction
Thank you for purchasing the QTX FH-650 fog/haze machine. This product has been designed
to provide variable atmospheric effects from thick fog and smoke to light haze. Please read
and keep this manual in order to achieve the best results from this equipment and avoid
damage through misuse.
Unpacking
The product should arrive with you in good condition with the following components.
 FH-650 fog/haze machine
 Wired timer remote control
 Mains lead(s)
If you find any accessory is missing or the machine has arrived with any problems,
please contact your local dealer at once. Please keep the original package and
invoice for any possible replacement or returned demand.
Warning
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on areas other than inside the fluid tank, disconnect the mains, allow the
FH-650 to dry out and have it checked by qualified personnel before further use.
Avoid any impact, dropping or extreme pressure to the housing.
No user serviceable parts inside - do not open the case.
Allow the FH-650 to acclimatize to room temperature before operating.
Refer all servicing to qualified service personnel.
Placement
The FH-650 has a built-in fluid container and should be operated in an upright position.
Ensure that the FH-650 is positioned on a stable, non-slip surface.
Safety
 Check for correct mains voltage and condition of IEC lead before connecting to mains
 Check the condition of the remote lead and ensure that it is not trapped
 This unit must be earthed
 This unit uses a heating element – be aware that parts of the housing may be hot in use!
Cleaning

Use a soft dry or slightly damp to clean the casing
 Do not use strong solvents for cleaning the unit
 Clean the haze mechanism periodically by operating with distilled water instead of haze
 It is also recommended to use fog machine cleaning fluid (160.670UK) periodically