160.550UK User Manual
Remote control
The BUBBLE-BOX is supplied with a choice of wired remote control or wireless receiver with keyfob remote.
Select which method is to be used and connect to the REMOTE socket (7) on the rear panel.
Press to switch wand rotation on or off. For wireless remote, the keyfob should have a 12V battery installed.
Replacing the fuse
Disconnect from the main power supply first, then remove the fuse holder part of the IEC Socket to reveal the
fuse. Replace the correct fuse rating as stated on the fixture safety label or in the user guide. Lock the fuse
holder cover back into place.
General maintenance
To maintain optimum performance and minimize wear, the item should be cleaned frequently. Usage and
environment are contributing factors in determining frequency. As a rule, fixtures should be cleaned after each
use to avoid dust build-up and blockages, which can result in poor performances, overheating and breakages.
Be sure to power off fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust collected on
external vents and internal components. Clean the external case when the fixture is cold with a dry cloth or
tissue, and drag dirt and grime to the outside case.
To ensure a continuing high performance it is recommended to use warm water to clean the internal tank.
Specifications
Power supply
230Vac, 50Hz (IEC)
Power consumption
26W
Number of wheels
1
Number of wands per wheel
10
RPM
45 rpm
Fluid capacity
0.7m
Remote control frequency
433.92MHz
Dimensions
390 x 300 x 255mm
Weight
4.5kg
Disposal:
The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful
life. The goods must be disposed of according to your local council guidelines
Errors and omissions excepted.
Copyright© 2017. AVSL Group Ltd.
