The display can be inverted for ease of programming if the fixture is mounted upside down.
•
Press MENU repeatedly until the display shows
(refer to appendix 1) followed
by ENTER.
•
The display will flash
.
Use the UP or DOWN button to invert the display
followed by ENTER.
•
The display will revert to
.
Please note that this will be inverted and may
appear as
.
•
Press and hold MENU for 5 seconds to save the setting.
The unit has a routine to test the functionality of all the LEDs.
•
Press MENU repeatedly until the display shows
(refer to appendix 1) followed
by ENTER.
•
The display will flash
and the unit will cycle through the colours in order (red,
green, blue, white).
•
Press ENTER to stop the test. The LEDs will go out and the display will stop flashing
and revert to
.
•
Press and hold MENU for 5 seconds to save the setting.
This routine shows the number of hours use.
•
Press MENU repeatedly until the display shows
(refer to appendix 1) followed
by ENTER.
•
The display will show the number of hours’ use
e.g.
.
•
Press and hold MENU to exit the routine.
This routine displays the internal temperature of the unit.
•
Press MENU repeatedly until the display shows
(refer to appendix 1) followed
by ENTER.
•
The display will show the temperature use eg.
.
•
Press and hold MENU to exit the routin
