152.766UK User Manual
Trouble shooting:
No power output
Check mains power is connected correctly and mains cable
is in good condition.
Check fuse is in working condition, if fuse continually blows
stop use immediately and refer unit to qualified personnel.
Power on but no output
Check dip switch 10 is not switched on.
Check key switch is switched on.
Check interlock switch if there is one connected.
If ambient temperature is low, laser head may take up to
30 min to warm up for max output.
Ensure mic sensitivity is turned up if sound-to-light mode is
selected.
DMX mode no output
Check correct DMX lead is used (balanced XLR).
Check DMX controller is not in blackout mode.
Check if DMX controller has polarity switch and is correctly
selected.
Check laser DMX initial address number is set correctly on
dip switch and switch 10 is switched on.
Ensure DMX lead is not running along with high voltage
cable.
Ensure channel 1 and channel 12 value is not set at 0.
Try alternative controller to ensure it is not faulty.
This product complies with laser safety standard EN60825-1 2007.
This product is classed as Electrical or Electronic equipment and should not be disposed with
other household or commercial waste at the end of its useful life. The goods must be disposed of
according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd
