USER MANUAL – DM-X3 RGB PAR CAN CONTROLLER
154.090
Page 3
NUMBER
BUTTON/FADER
FUNCTION
1
HOLD COLOURS
When COLOUR SELECT is active select a pre-set static colour from
the options
2
HOLD COLOURS
Immediately stops any colour change or fade and holds the current
colour until deactivated
3
COLOUR SELECT
Press to activate the HOLD COLOUR or manual RGB Faders
4
PROGRAM SELECT
Activates the Pre-set programs selected by FADER 1
COLOUR SELECT
PROGRAM SELECT
5
(FADER 1)
Slide fader to adjust red
brightness
Used to select the internal program
6
(FADER 2)
Slide fader to adjust green
brightness
Adjusts the colour change speed of the
internal program (Slow to fast)
7
(FADER 3)
Slide fader to adjust blue
brightness
Sets the strobe speed (slow to fast)
8
AUTO
Turns automatic colour change on. Use FADER 2 and FADER 3 to
adjust change speed and strobe effect
9
SOUND ACTIVATED
Colour changes to the beat of the sound (use FADER 3 to adjust MIC
sensitivity)
10
BLACKOUT
Turns off all light output
11
MIC
Detects sound beats
OPERATIONS GUIDE:
PRESET STATIC COLOURS:
Press “COLOUR SELECT” button. A green LED above the button will indicate this mode is active.
You can then select a preset colour from: RED
，
ORANGE
，
YELLOW
，
GREEN
，
CYAN
，
BLUE
，
PURPLE
，
MAGENTA
，
WHITE by pressing the desired button, or choose your own by using the RGB FADERS.
BUILT-IN PROGRAMS
Press “PROG SELECT” button. An amber LED above the button will indicate this mode is active.
Use FADER 1 to select one of the programs listed below (from 0-255)
Red Static
Green Static
Blue Static
Light Green Static
Purple Static
Cyan Static
White Static
Red Pulse
