Action :
Action :
2) Press and hold
FINE
&
MODE
buttons together
to access the channel assignment mode ,then
press the
SCANNER
button
1)
press and hold the
PROGRAM
button until the led
blinks
3)
Use the
Bankup/Down
buttons to select pan/tilt
Notes :
Notes :
You can permanently reverse the output of any given
channel on the controller.
Press AUTO/DEL&MODE buttons together to delete the
reverse channel.
3.1.7 FADE TIME ASSIGN
3.1.7 FADE TIME ASSIGN
You can choose whether the board
s fade time during scene execution is implemented broadly to all
output channels or only to the Pan & Tilt movement channels. This is relevant because often you will
want gobos and colors to change quickly while not affecting the movement of the light.
Action :
Action :
2)
Hold the
MODE
and
TAP DISPLAY
buttons
simultaneously.
1
) Turn OFF the controller.
3)
Turn ON the controller.
Notes :
Notes :
4)
Press the
TAP DISPLAY
button to toggle between
the two modes. Either ALL CH (all channels) or
ONLY X/Y (Pan & Tilt only)
5)
Press
MODE
and
TAP DISPLAY
to save settings.
All LEDS will blink to confirm.
ALL CH: All channels ONLY X/Y: Only Pan & Tilt
3.1.6 REVERSE CHANNEL OUTPUT
3.1.6 REVERSE CHANNEL OUTPUT
4)
Press the
TAP/DISPLAY
button to switch between
pages
3.2 Operation
3.2 Operation
3.2.1 MANUAL MODE
3.2.1 MANUAL MODE
The manual mode allows direct control of all scanners. You are able to move them and change
attributes by using the channel faders and wheel.
Action :
Action :
2)
Select a
SCANNER
button.
1
) Press the
AUTO DEL
button repeatedly until the
MANUAL LED is lit.
3)
Move wheel and faders to change fixture attributes.
Notes :
Notes :
All changes made while in Manual Mode are
temporary and will not be recorded.
PAGE/SELECT A/B
button:
Use to switch between fader control of (A: Ch1~8),
(B: Ch 9~16)
TAP DISPLAY
button:
Press to toggle the output indicator on the LCD display
between DMX values (0-255) and percentage (0-100)
1 0 /2 0
5)
press and hold
MODE
button,then press the
SCENES
buttons to select the DMXchannel.All LEDs will blink.
6)
Press and hold
FINE
&
MODE
buttons(2)times to exit
DM X 5 1 2 CON T ROLLER SERI ES
U SER M AN U AL