3.1.3 FADE TIME ASSIGN
You can choose whether the board s fade time during scene execution is implemented broadly to all
output channels or only to the Pan & Tilt movement channels. This is relevant because often you will
want gobos and colors to change quickly while not affecting the movement of the light.
Action :
2)
Hold the
MODE
and
TAP DISPLAY
buttons
simultaneously.
1
) Turn OFF the controller.
3)
Turn ON the controller.
Notes :
4)
Press the
TAP DISPLAY
button to toggle between
the two modes. Either ALL CH (all channels)
5)
Press
MODE
and
TAP DISPLAY
to save settings.
All LEDS will blink to confirm.
ALL CH: All channels ONLY X/Y: Only Pan & Tilt
3.2 Operation
3.2.1 MANUAL MODE
The manual mode allows direct control of all fixtures. You are able to move them and change
attributes by using the channel faders and wheel.
Action :
2)
Select a
FIXTURE
button.
1
) Press the
AUTO DEL
button repeatedly until the
MANUAL LED is lit.
3)
Move wheel and faders to change fixture attributes.
Notes :
All changes made while in Manual Mode are
temporary and will not be recorded.
PAGE/SELECT A/B
button:
Use to switch between fader control of (A: Ch1~8),
(B: Ch 9~16)
TAP DISPLAY
button:
Press to toggle the output indicator on the LCD display
between DMX values (0-255) and percentage (0-100)
7
DMX 512 CONT R OLLE R S E R IE S
U S E R M A N U A L
