![qtran QOM-eLED Ordering Manual Download Page 11](http://html1.mh-extra.com/html/qtran/qom-eled/qom-eled_ordering-manual_3329895011.webp)
INSTALLATION
LED POWER SUPPLY - QOM-eLED+DMX
© 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com
Specification subject to change. Rev-12-08-21
CSA Requirements
•
Suitable for indoor and outdoor use
•
This power supply must be installed according to the National Electric Code and local codes and ordinances and in
accordance with applicable installation code by a person familiar with the construction and operation of the product and
the hazards involved.
•
Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
•
This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
•
To avoid a hazard to children, account for all parts and destroy all packaging materials.
•
DMX shield wire must be grounded to earth ground at a single point external to power supply.