How to adjust your Torque Wrench
To check setting:
Use a Torque Analyser. For more details on the
different Analysers visit www.gedore-torque.com
To adjust the torque setting:
Use a 4 mm hex key to remove the end cap.
Use a 2 mm hex key to release the locking grub
screw by turning anti-clockwise.
To increase torque:
Using the 4mm hex key, rotate clockwise
until the correct torque is shown consistently
on the Analyser. (10 readings)
To reduce torque:
When adjusting, always approach the required
torque from a lower setting.
To reduce the torque, rotate the key anti-clockwise
past your setting, then increase
torque to the required value.
To set torque:
Turn the locking grub screw clockwise with a 2mm
hex key.
To use Torque Wrench
:
The preset wrenches are designed
for use with sockets
Servicing Information
Regular servicing of your Torque Tool by
competent personnel is important to
ensure it continues to perform correctly.
