How to adjust your Torque Screwdriver
check setting:
Use a Torque Analyser.
To adjust the torque setting:
Use a 5 mm hexagon key to remove the end cap.
Then use the same 5mm hexagon key to turn the
torque adjuster.
To increase the torque:
Using the 5mm key provided, rotate clockwise
until the correct torque is shown consistently
on the Analyser. (10 readings)
To reduce the torque:
When adjusting, always approach the required
torque from a lower setting.
To reduce the torque, rotate the hexagonal key
anti clockwise pass your setting, then increase
torque to the required value.
To set torque:
The adjustment mechanism locks
automatically when the hexagonal key is removed.
To use Torque Wrench:
The BW Wrench is designed for use with special end fittings.
Servicing Information
Regular servicing every year or 5000 cycles of your Torque
Tool is important to ensure it continues to perform correctly.
-
+
