Configuration manual
11. Bootloader
118
www.qtech.ru
Step
Command
Description
Enter the
Bootloader
configuration mode
None
Mandatory.
After
the
device
is
powered on, press the Ctrl
+ C keys to enter the
Bootloader configuration
mode. After you enter the
mode, the "bootloader:>"
is prompted.
Set the Bootloader boot
parameters
change { index } { boot-dev
} { filename } [ local-
ip-addr ] [ host-ip-addr ] [
gatewayip ] [ netmask ]
Mandatory
If setting the boot device type to the file system boot, you can select the
existing Image program name in the flash file system to load and run
according to the prompt information.
If setting the boot device type to the network boot, it is necessary to ensure
that the route between the Ethernet interface of the host or terminal and
the network management interface (such as ge0) of the device is reachable.
You can use the ping tool to perform the ping test for the IP address of the
device at the host, detecting whether the network channel is connected
normally.
11.2.3
Upgrade the Bootloader Program
Configuration Condition
None
Upgrade the Bootloader Program
Table 11-3 Upgrade the Bootloader program
Step
Command
Description
Enter the Bootloader
configuration mode
None
Mandatory.
After the device is powered
on, press the Ctrl + C keys
to enter the Bootloader
