Page | 4
TRANSPORTING YOUR QTAC
Gross Vehicle Weight Rating
•
Ensure that the gross vehicle weight rating (GVWR) of the QTAC carrying vehicle
is sufficient to support your QTAC unit plus any equipment, fluids and personnel
that you may wish to carry.
General QTAC Mounting and Fastening
•
Mount the QTAC at the flanges (see
Figure 1
), located at the bottom of the skid.
Ensure that the bottom of the QTAC (including the mounting flanges) abuts a
firm, flat surface or rack. Avoid significant leveraging of the mounting flanges.
See
Figure 1
for examples of proper and improper mounting surfaces.
Figure 1 – Bolting locations
Special Precautions For Carrying a QTAC On Ride-On ATVs Or Side-By-
Side UTVs
•
Ensure that the area to which you are securing your QTAC is an approved
loading area for your ATV or UTV.
IMPROPER
MOUNTING
SURFACE!
