Q'STRAINT M-Series, Use And Care Manual, Page: 21 / 24

21
MAINTENANCE AND CARE
WARRANTY - ALL SYSTEMS, PRODUCTS & ACCESSORIES
WARRANTY REGISTRATION
Q’STRAINT’S LIMITED WARRANTY: Q’Straint® warrants this product conformance to our manufacturing specifications and to be free from defects in materials
and workmanship. Q’Straint® or its authorized dealer will (at its sole discretion), repair or replace the defective component(s) free of charge. This warranty
does not cover the cost of assembly or disassembly, transportation, labor, or any other incidental costs involved in the removal of a defective part or the
installation of the replacement part.
Q’Straint® or its authorized dealers reserves the right to inspect the product to verify the claimed defect has not been caused by non-Q’Straint® approved
maintenance or by foreign particles or substances. This Warranty does not apply to defects that result from accident, misuse or abuse, intentional damage,
fire, flood, alteration or modification of the product, negligence, exposure, or use of the product in a manner inconsistent with its intended use.
COVERED PRODUCTS AND LIMITATIONS:
Q’STRAINT’s limited warranty coverage applies only to factory defects in materials and workmanship in the Products as follows:
QRT 350, QRT 550 - 5 years*
QRT Deluxe, QRT Max, 3 years*
QRT Standard, Q-5000, M-Series, 2years*
QER Electrical Retractor - 1 year
*Only valid if product is registered with Q’STRAINT. Otherwise a 1 year limited warranty applies to all products.
REGISTER PRODUCTS ONLINE AT:
WWW.qstraint.com/registration
The following items should be inspected and serviced by an experienced and trained technician during the scheduled
maintenance of the Q’Straint® 4-Point Wheelchair Securement System.
• Always keep belts clean and off the floor by using a storage device such as a Q’Straint® wall pouch. We recommend one
storage device per wheelchair location.
• All systems and components MUST be regularly inspected, tightened, cleaned, and maintained.
• Clean webbing periodically with mild soap and water. After cleaning, fully extend belts and position them to prevent
water from entering retractors until completely dry.
• Make sure to prevent contamination of the webbing by keeping it away from polishes, oils or other chemicals
(particularly battery acid).
• Occasionally lubricate buckles and fittings, without contaminating the webbing.
• Clean bolt threads and reapply permanent thread locker if bolts are adjusted.
• Frayed, contaminated or damaged webbing MUST be replaced immediately.
• Systems or components exposed to a vehicle accident, showing signs of missing parts, excessive damage or wear
MUST be replaced.