Qstarz GM-Q772 User Manual Download Page 6

Page: 6 / 32

3. USB Driver Installation

3.1 System Requirements

IBM, Pentium or above and other compatible PC; 16 MB and above memory; Windows 98/Me/2000; VGA

Graphic Adapter

3.2 Installation

Copy entire <USB> folder from CD-ROM to hard disk.

Connect the USB connector to computer. While the computer automatically starts the installation program,

please direct the driver to the <USB> folder.

After the installation is complete, go to <Device Manager> and select <Ports (COM & LPT)> to verify if a

virtual COM port <USB to Serial Port> was created.

3.3 Important Notice

Verify the COM port # to start using your own navigating software.

Click

<Start>

menu, select

<Settings>,

then enter

<Control Panel>

After entering

<Control Panel

>, select

<System>

3. Select

<Device Manager>

4. Find the

<Connect Port>

and check the Virtual COM Port, which was created by the USB driver. Please note

that the Virtual COM Port number might be different from every computer. Before using navigating software,

please confirm the COM Port numbers created by your computer and provided by your navigation software. They

must be the same Com Port numbers. Otherwise, the navigating software won’t receive the satellite signal for the

un-match COM Port setting.

4. Warranty

The GPS smart receiver is warranted to be free from defects in material and functions for 1 year from the date of

purchase. Any failure of this product within this period under normal conditions will be replaced at no charge to

the customers.

Summary of Contents for GM-Q772

































Search results

Summary of Contents for GM-Q772

Reviews:

Related manuals for GM-Q772

Brands by name

Popular brands

Qstarz GM-Q772, User Manual

Search results

Summary of Contents for GM-Q772

Reviews:

Related manuals for GM-Q772

Brands by name

Popular brands