Beyond Navigation
1
CR-Q1100P GPS Tracking recorder
Quick Start Guide
Page 1: ...Beyond Navigation 1 CR Q1100P GPS Tracking recorder Quick Start Guide ...
Page 2: ...nsor is set Off as default Sleeping mode is functioned only when Vibration sensor is activated On by software Charge Battery Fully charge the battery for 3 hours when using at the first time For the first time using the CR Q1100P please charge battery until it is fully charged Please connect the supplied USB cable with your CR Q1100P and connect with any device has USB port such as PC Notebook to ...
Page 3: ...g Users can also manually set the port Please refer to users manual for more detail information 4 1 GPS Device Name Unique ID Name your Travel Recorder here and your downloaded log data will come with this unique ID 4 2 GPS Log Setting There are 4 log modes General mode vehicle mode cycling mode and hiking mode Users can also change the default setting of these 4 modes 4 3 Data Log Memory Overwrit...
Page 4: ...ng 10 Less than 15 Sec AGPS fix support download almanac data to realize faster TTFF and positioning under warm start 11 DGPS WAAS EGNOS MSAS support 12 Recharging downloading data via USB A type connector which is better for harsh use 13 Update Rate up to 5Hz default at 1Hz for receiving data only 1 The waypoints would be decreased when the more options of Log Format are selected TroubleShooting ...
