Step 3: Open a browser, type
, and enter the default username and password,
admin/
admin
.
Step 4: Click sign in to display the web-based configuration page.
Configuring the Switch Using the Console Port
Step 1: Connect a computer to the switch's console port using the supplied console cable.
Step 2: Start the terminal simulation software such as HyperTerminal on the computer.
Step 3: Set the parameters of the HyperTerminal: 9600 bits per second, 8 data bits, no parity, 1 stop bit
and no flow control.
Step 4: Enter the default username and password,
admin/admin
.
www.qsfptek.com
9
／
11
www.qsfptek.com
V1.0
9
／
11
