Configuration
Maximum WL2082-i in array
Maximum WL115-sw in array
Single FB2082-i
12
0
8
2
5
3
0
4
Dual FB2082-i with EB2082-i
12
3
10
4
(subwoofers behind line array)
Specifications
Specifications subject to change without notice.
Array Configurations
The following table provides information regarding the maximum number of WL2082-i line
array elements and WL115-sw subwoofers that may be suspended using various configurations
of the available suspension accessories. The calculations for this table are based on a 10:1
design factor. See owner’s manual for detail before designing or suspending array. While a single
WL2082-i may be used for some specialized applications such as stage lip front fill, or under
balcony fill three or more ILA elements are required before the system begins to perform as a
true line array.
Aiming the ILA
Aiming and array configuration of an ILA system is supported by EASE
Focus. Focus is a two-dimensional acoustic simulation application that
calculates vertical coverage of a venue by a line array system. This free
software may be downloaded from the support section of the QSC
website at
www.qscaudio.com
.
Horizontal Polar Plots (Individual enclosure)
Ratio vs Angle
Ratio vs Angle
