WL218-sw
Dimensions | Specifications
qscaudio.com
Specifications subject to change without notice.
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
WL218sw Spec Sheet – 06/19/08
Configuration
2 x 18" vented subwoofer
Low-frequency Transducer
2 x 850 W, 8
Ω
18" woofer with a 4" voice coil, ceramic magnet assembly
Frequency Response (±3 dB)
1
37 Hz – 200 Hz (without processing)
Frequency Range (-10 dB)
1
31 Hz – 1 k (without processing)
Nominal Impedance
4
Ω
Continuous Power Capacity
2
/ Recommended Power
1700 W / 3000 W
Sensitivity (1 W at 1 m)
1
101 dB
Maximum Output – Continuous / Peak (SPL at 1 m)
133 dB / 139 dB
Cabinet Type
Vented, trapezoidal enclosure
Enclosure Material
Baltic birch plywood / 36 mm baffle and side panels; 15 mm top and bottom
Grille
14 gauge powder coated steel
Connectors
2 x NL4 in parallel
Pin Outs
Pins
1+/1- Sub
2+/2- NC
Attachment Points
Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 0° – 10°
Weight (Net / Shipping)
204 lb (92.5 kg) / 244 lb (110 kg) – includes dolly
Dimensions (HWD)
21.3" x 45.9" x 34.75" (541 mm x 1166 mm x 882 mm)
Accessories Available
AF218-sw Array Frame (optional)
COVER WL218-sw Soft Cover (optional)
1) Half-space conditions
2) 2 Hrs, AES1984-2, 40 – 400 Hz, tested as system
Front
Side
Top
45.9"
1166 mm
21.3"
541 mm
34.75"
882 mm
QSC, the QSC logo, QSControl.net and BASIS are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries.
All other trademarks are the property of their respective owners. Patents may apply or be pending.
