background image

7

8

Adjusting the Angle Between Enclosures (Splay)

The illustration shows the rear pin block of two enclosures joined by the 
upper enclosure’s rear link arm. 

Use the first pin location (closest to the end) on the link arm for setting in 
normalized 2° increments. The left-side example shows two enclosures 
linked for 8° of splay. The ball-lock pin is inserted into the 8° position in 
the rear block while passing through the “normal” pin hole in the link.

When the “+3“ location is used, an additional 3° are added to the 
“normalized” location. The right side example shows two enclosures 
linked for 9° of splay. The ball-lock pin is inserted into the 6° position in 
the rear block while passing through the “+3°” pin hole in the link. The 
total splay is the 6° indicated on the block, plus the 3° additional from 
the link position, for a total of 9°. In this manner 1° increments can be 
attained starting with 3° (0° block location and +3° link arm location).

AF2102-LA and 

WL SmALL Grid

There are two array frames available for the WideLine-10 system.

The AF2102-LA is used for suspending larger arrays. The AF2102-LA may 
be inverted and used for ground stacking. 

The WL SmALL GRID is a compact and easier to handle frame for use 
as a small array or stacking frame. This frame will easily sit on ground 
stacked bass enclosures or it can be used to suspend smaller arrays 
from the stage trusses.

AF2102-LA

Use only the QSC supplied 5/16

"

 diameter x 1.25

"

 long 

ball-lock pins or equivalents from a reputable source on front  
receiver tubes.

The three pick up rails allow for any number of rigging solutions to fit 
the most demanding venues. The rails are drilled for industry standard 
5/8" shackles. 

Do not stack more than eight (8) enclosures on the 
AF2102-LA Frame.

Rear link attached to 

achieve an 8° splay 

between enclosures.

Rear link attached 

to achieve a 9° splay 

between enclosures.

31.6"

(803 mm)

Bolt on receiver 

tube and 5/16" 

diameter, 1.25" 

long ball-lock pin.

14.8"

(376 mm)

37.0"

(940 mm)

Left pickup rail

Center pickup rail

Right pickup rail

Front

Summary of Contents for WideLine-10 WL2102













Reviews: