background image

TD-000500 -01      -D

 

 

 

 

 

 

Installation

 Ventilation 

 

•  Recommend 1RU (1.75 in / 44.45 mm) space above the amplifi er.

•  Minimum open space of 6 inches measured from back of amplifi er.

NOTE: 

 

QSC System Power Amplifi ers contain advanced protection 

circuitry which allows them to reduce output power in order to 
maintain safe operating temperatures. Insuffi cient ventilation may 
result in the amplifi er reducing output power during normal 
operation (indicated by Limiter/Protect LEDs illuminating red). To 
reduce the possibility of thermal limiting, and allow proper heat 
dissipation, we recommend that you keep the space directly above 
and to the rear of these amplifi ers free of obstacles.

— Figure 1 —  

2

1

    

Select the Amplifi er Installation Confi guration

Choose one of the following confi guration options:

A. One Amplifi er 19-inch Rack (Left or Right Mount) on page 3

D. Under Table or on Wall on page 4

B. Two Amplifi ers 19-inch Rack (Front or Rear Facing Out) on page 3

E. Free-Standing on Desk/Table on page 5

C. One Amplifi er Half Rack (Front or Rear Facing Out) on page 4

F. Plenum Installation on page 5

Summary of Contents for SPA2-60













Reviews: