3
TD-000440-01-C
Loudspeaker Connections
The SB-1180 is equipped with a four-position barrier strip with screw terminals that accept spade lugs or bare wire as large as 10 AWG. Inputs are
labeled
-
and
+
. Be sure to maintain consistent polarity from the amplifier to the loudspeaker’s input terminals. The parallel-wired output terminals
allow daisy-chain connection of additional loudspeakers; be sure to check the power amplifier’s specifications to avoid loads below the amplifier’s
minimum rated impedance.
Specifications
System Details
SB-1180
Frequency Range
1
(-10 dB)
29 Hz to 170 Hz
Rated Noise Power (Voltage)
2
600 watts
Sensitivity
3
98 dB
Maximum continuous SPL
4
125 dB
Maximum peak SPL
4
131 dB
Rated Impedance
8
Ω
Maximum Recommended Amplifier Power
1200 watts
Transducer
18 in (457 mm) woofer
Enclosure Details
Input Connector
4–position barrier strip
Enclosure Material
MDF, non-reflective black vinyl
Grille
None
Dimensions (HxWxD)
35.9 × 30.2 × 11.7 inches (912 × 767 × 297 mm)
Net Weight
87 lb (39.5 kg)
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, unprocessed, -10 dB from on-axis sensitivity
2 AES2–1984 noise signal for 2 hours
3 On-axis, free-field sensitivity, 2.83 V, 1 m
4 Calculated from rated noise voltage and sensitivity
— Figure 1 —
Amplifier
