PS-1650G | PS-1600G | PS-800G | PS-400G |
Specifications
Page Stations Gooseneck Models Spec Sheet 01/13/12
©2012 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries.
Q‑Sys is a trademark of QSC Audio Products, LLC.
please recycle
Preliminary Specifications
Audio Channel Capacity
2 line inputs, 1 line output
Front Panel Controls
Paging Keypad: Capacitive touch keypad
Front Panel Indicators
Talk, Ready, Busy: Bi-color LEDs (red/green)
Keypad button activity: Green LEDs
LCD: 240 x 64 monochrome graphics display
Rear Panel Connectors
Q-Sys Network LAN A: RJ45 1000 Mbps only
Q-Sys Network LAN B: RJ45 1000 Mbps only
DC power +24V inlet: 2-pin Euro receptacle
Line input: 3-pin Euro receptacle
Line output: 3-pin Euro receptacle
GPIO: 6-pin Euro receptacle
Line Voltage Requirements
IEEE 802.3af power over Ethernet (PoE) or +24V DC
Dimensions (HWD)
10.37" (26.4 cm) x 8.3" (21.1 cm) x 1.5" (3.8 cm)
Accessories Included
Hardware user manual, software CD, connector ship kit,
warranty card.
Line Input
Dynamic Range
Unweighted
A-weighted
> 115 dB
> 118 dB
Distortion (20 Hz - 20 kHz, all
sensitivities)
+4 dBu (max)
2 dB below clip
< 0.009% THD+N
< 0.009% THD+N
Crosstalk (20 Hz - 20 kHz)
Inter-channel (max)
Inter-channel (typical)
Intra-channel (max)
Intra-channel (typical)
> 75 dB
> 90 dB
> 85 dB
> 100 dB
Frequency Response
20 Hz - 20 kHz (max)
20 Hz - 20 kHz (typical)
± 0.5 dB
± 0.2 dB
Input Impedance
Balanced (nominal)
Unbalanced (nominal)
10k ohms
10k ohms
Common Mode Rejection
20 Hz - 20 kHz (max)
20 Hz - 20 kHz (typical)
> 54 dB
> 60 dB
Input Sensitivities
Vrms: 1.5, 3, 9, 18
dBu: 5.7, 11.8, 21.3, 27.3
dBv: 3.5, 9.5, 19.1, 25.1
Line Output
Dynamic Range
Unweighted
A-weighted
> 112 dB
> 115 dB
Crosstalk (20 Hz - 20 kHz)
Inter-channel (max)
Inter-channel (typical)
Intra-channel (max)
Intra-channel (typical)
> 75 dB
> 90 dB
> 85 dB
> 100 dB
Mute
Infinite attenuation
Q‑Sys Public Address Functionality
Q‑Sys Designer (version 2.0 and higher) includes the
Public Address Router, a suite of functions to support
public address applications. Most of these functions
may be deployed whether or not the Q‑Sys system
incorporates QSC Page Stations. Alternative interfaces
such as touch screen controllers may also be used
in conjunction with analog microphones. All of these
functions are executed by the Q‑Sys Core with no
additional hardware “boxes” required.
Local backup paging (requires local amplification &
loudspeaker) permits the station to function locally
even if the core and network become unavailable.
Virtual Page Station supports the design of custom
graphic or physical page station interfaces. It is used
in conjunction with a microphone connected to an
analog input and can support any number of preset
page events or allow the user to create ad‑hoc
destination Zone Groups, etc.
The Design Administration Interface is provided to
allow facility personnel to manage day to day changes
to selected system settings without accessing the
system design. Functions including security code
changes, station / zone assignments and scheduling
of pre‑recorded messages may be made available to
facility staff
A variety of Paging Logic functions are supported
including:
• Source to zone routing
• Priority and interruption logic
• Queuing logic
• Page delay
• Preambles (such as chimes)
• Emergency paging priority and over-ride logic
Messaging capability includes the ability to record
announcements and trigger playback of pre‑recorded
announcements. Multi‑layer security is provided with
pass‑code access. A sophisticated Event Scheduler is
provided that can be used to schedule pre‑recorded
announcements or to make changes to system
parameters at pre‑specified times.
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
