34
TD-001578-01-C
Output Zone − Limiter
The Limiter prevents the audio level from exceeding a
preset threshold.
1.
Limiter
– Opens the Limiter screen.
2.
Limiter Out/In
switch – Engages or disengages the
compressor or limiter.
3.
Simple
button – Hides all controls except:
• Limiting Slider
• Limiter In button
• Simple button
• Reset button
4.
Reset
button – Sets all the Limiter controls to their
factory default position.
5.
In
meter – Displays the RMS input signal level
6.
Reduction
meter – indicates how much the signal
level is reduced by the Limiter.
7.
Output
meter – Output signal level
8.
Limiter
graph – When engaged, the Limiter trace is
fuchsia.
•
Threshold
(A) – The level at which limiting begins.
•
Attack time
(B to C) – The time it takes for the
limiter to reach maximum limiting after the input
exceeds the threshold level.
•
Ratio
(A to E) – The amount of limiting applied to the signal.
•
Release
time (C to D) – The time it takes for the limited signal to rise to the threshold level once the input level no longer exceeds
the threshold.
• Vertical scale = dB
9.
Threshold
slider
–
Sets the point at which the limiter begins to reduce the signal level.
10.
Attack slider
– Adjusts how quickly the processor reacts to a signal that exceeds the threshold.
11.
Release slider
– Adjusts how quickly the processor stops compressing or limiting when signal falls below the Threshold.
Touch
Outputs
Touch
Limiter
B C
D
A
E
3
4
1
10
9
6
8
11
5
2
7
