5
TD-001607-01-A
Do not apply signal with low-frequency content below 200 Hz to the mid/hi input.
Low-Frequency Connection
Connect the low-frequency amplifier channel output directly to the input terminals of the low-frequency enclosure. Do not connect the amplifier
channel or the low-frequency enclosure to the terminals on the mid-high assembly.
Output Terminals
The upper terminals labeled
MND
and
HN
are factory-connected to the drivers, so do not connect anything to them for normal operation.
The
PWSSNVT LF NAOPAO
terminals are not used in bi-amp mode.
NOTE:
Maintain correct polarity at every connection throughout the entire system for optimum performance. Do not connect any
signal to the
MND
and
HN
terminals.
— Figure 4 —
Summary of Contents for MH-1060 Series
Page 7: ...7 TD 001607 01 A Figure 5...
