18
TD-001536-01-B
Menu Listing
CROSSOVER
Set the crossover frequency
CROSSOVERS
80 Hz
100 Hz
CROSSOVERS
The 80 Hz low-pass filter is optimized for the K.2 Series, CP Series, and future
loudspeakers
The 100 Hz low-pass filter is optimized for the legacy K, KLA, and KW
loudspeakers
Both crossover frequencies will time-align the subwoofer with a K.2 Series
loudspeaker pole-mounted over it, with both front edges parallel to each other.
DELAY
Set the amount of delay
DELAY
1.69 FEET
DELAY
1.50 ms
0.51 METERS
0 – 100 milliseconds, 0 – 113 feet, 0 – 34 meters
All three units of measure display simultaneously.
SCENE
Save or recall a user-defined scene
SCENE MENU
RECALL SCENES
SCENE MENU
SAVE SCENES
With the knob, select the desired function.
SAVE SCENES
is for storing all
the current DSP settings into any one of five slots.
RECALL SCENES
is for
configuring the subwoofer with all the DSP settings that have been saved to
one of the scenes.
SAVE SCENE
TO
USER 1 – 5
USER 4
SAVE SCENE TO
USER 3
USER 2
To save the current DSP settings as a scene, select which of the five available
slots you wish to use. Select from User 1 through User 5, then press the Enter
button.
The saved scene remains active, and a triangle appears next it.
RECALL
SCENE
USER 1 – 5
LOAD
BACK
USER 1
USER 2
RECALL SCENE
USER 3
A triangle next to the scene name indicates that it is active. To recall a different
scene, select the one you want. Press the Enter button to load its settings and
make it the new active scene.
SETTINGS
Utility functions
SETTINGS
menu
LED
KS 212C 1.0.6.2844
CONTRAST
FACTORY RESET
This displays the model number and firmware version (these cannot be edited).
The available selections are
LED
,
CONTRAST
, and
FACTORY RESET
.
Select the one you want and press the Enter button.
LED
FRONT AND REAR
REAR ONLY
LED
FRONT ONLY
Selects which combination of front and rear power indicator LEDs to use. Press
Enter to put your selection in effect.
CONTRAST
LEVEL 8
CONTRAST
TEST TEXT
Adjusts the contrast of the LCD screen. Contrast settings are 0 through 15; the
default is 8. The screen changes as you adjust so you can see what the result
will be. Press Enter to put your selection in effect.
FACTORY
RESET
YES
NO
USER PRESETS AND
SETTINGS WILL BE
SET TO DEFAULT
FACTORY RESET
CONTINUE?
Resets all parameters to the factory default settings. To proceed, press Enter;
to cancel, press Go Back.
CAUTION: this also clears all the user scenes; there is no way to recover the
scenes or undo the clearing.
DEEP
KS118 only
OFF
ON
OFF
ON
DEEP
OFF
uses the normal subwoofer response.
ON
boosts the low-frequency
extension below 60 Hz but decreases sensitivity by 3 dB to maintain headroom.