QSC ILA System v2, User Manual

Page: 13 / 20

11 12
WL2082-i / WL118-sw Specifications
Specifications subject to change without notice.
WL2082-i WL118-sw
Configuration 3-way, bi-amp or tri-amp mode Direct radiating vented box
Transducers
High-frequency
Low-frequency
Dual 50 W, 8 Ω 1" exit, 1.75" titanium diaphragm,
neodymium magnet assembly
Dual 200 W, 16
Ω
8" woofer, 2" voice coil, neodymium
magnet assembly, weather resistant cone
—
850 W, 8
Ω
18" woofer with a 4" voice coil, ceramic
magnet assembly
Frequency Response (±3 dB) 80 Hz – 20 kHz 32 Hz – 200 Hz
Frequency Range (-10 dB) 68 Hz – 22 kHz 29 Hz – 800 Hz
Nominal Impedance HF: 16 Ω
LF bi-amp mode: 8
Ω
LF tri-amp mode: 16
Ω
(x 2)
—
—
LF: 8
Ω
Continuous Power Capacity
1
/
Recommended Power
HF: 100 W / 200 W
LF bi-amp mode: 400 W / 800 W
LF tri-amp mode: 200 W / 400 W (x 2) —
—
LF: 850 W / 1750 W
Sensitivity (1 W at 1 m) HF: 106 dB
LF: 96 dB —
LF: 98 dB
Maximum Output Continuous / Peak (SPL at 1 m) HF: 126 dB / 132 dB
LF: 122 dB / 128 dB
—
LF: 128.5 dB / 134.5 dB
Nominal Coverage H: 140°
V: dependent on number of elements used —
—
Cabinet Type Ported, elliptical / trapezoidal Vented subwoofer
Enclosure Material HIPS (high impact polystyrene) with UV protectant 18 mm Baltic birch plywood
Finish Available in black (WL2082-i BLK) or white
(WL2082-i WHT) paintable Available in black (WL118-sw BLK) or white
(WL118-sw WHT) paintable
Grille Perforated, formed aluminum 16 gauge powder-coated steel with cloth backing
Connectors 2 x NL8 in parallel 2 x NL8 in parallel / 2 x NL4 in parallel
Pin Outs Pins
1+/1-
2+/2-
3+/3-
4+/4-
Bi-Amp
N/A
N/A
LF
HF
Tri-Amp
N/A
LF2
LF1
HF Pins (NL8)
1+/1-
2+/2-
3+/3-
4+/4- Sub
Pass thru (LF)
Pass thru (MF)
Pass thru (HF)
Pins (NL4)
1+/1-
2+/2- Sub
Pass thru
Attachment Points Integral, side plate adjustable rigging system, vertical splay
adjustable in 1° increments from 0° – 10° Integral, non-adjustable (straight array only)
Weight (Net / Shipping) 37 lb (16.8 kg) / 45 lb (20.45 kg) 111 lb (50.4 kg) / 121 lb (55 kg)
Dimensions (HWD) 11.8" x 27" x 13.4" (300 mm x 686 mm x 340 mm) 22.1" x 27.6" x 30.3" (562 mm x 702 mm x 771 mm)
Accessories Available
FB2082-i
EB2082-i
PB2082-i
AB2082-i:
GS115-sw:
QRP-KIT-1
Fly-bar for WL2082-i and WL118-sw. Available in black or white.
Extension bar, allows WL118-sw to be suspended behind WL2082-i. Available in black or white.
Pull-back bar for WL2082-i. For use when pulling back the bottom of the array is necessary to achieve the desired angle.
Available in black or white.
Angle bracket, allows greater vertical splay between WL2082-i and WL118-sw enclosures in ground stacked configura-
tions. Available in black. Requires two brackets per array, sold individually.
Ground stack kit for WL118-sw.
Kit of four (4) Quick Release Pins for use in lieu of included bolts.
1) 2 hours, IEC specified noise