background image

 

2

WARRANTY (USA only; other countries, see your dealer or distributor)   

 

Disclaimer 

 

QSC Audio Products, LLC (“QSC”) is not liable for any damage to amplifiers, loudspeakers, or other equipment 
that is caused by negligence or improper installation and/or use of this signal processing product. While QSC 
has endeavored to develop and produce the most dependable and robust ‘network’ audio product for your use, 
due to the myriad of network situations and equipment that may be encountered in its implementation, QSC 
cannot be held responsible for network conflicts and associated consequences that may result. For this reason, 
QSC strongly recommends that the network used for implementation of the DCP 300 product(s) be completely 
separate from all other networks, data or otherwise. As such, should you elect to integrate the DCP 300 
product(s) with an existing network system, all risks attendant to such integration of the DCP 300 product(s) with 
an existing network or network systems are assumed by you. While QSC strives to provide the highest quality 
technical solutions for networked audio products, in no event will QSC or its suppliers be held liable for any 
damage, consequential, incidental or otherwise, including any claims for lost profits and/or savings resulting from 
any attempted integration of the DCP 300 product(s) with an existing network or network system. No agent, 
employee or representative of QSC has any authority to alter or modify in any manner, the disclosures and 
recommendations set forth herein.  
 
 

QSC Audio Products 3-Year Limited Warranty 

 

QSC Audio Products, LLC (“QSC”) guarantees the DCP 300 product to be free from defective materials and/or 
workmanship for a period of three (3) years from the date of 

s

ale and will replace defective parts and repair 

malfunctioning products under this warranty when the defect occurs under normal installation and use – 
provided the unit is returned to our factory or one of our authorized service stations via prepaid transportation 
with a copy of proof of purchase (i.e., sales receipt). This warranty provides that the examination of the returned 
product must indicate, in our judgment, a manufacturing defect. This warranty does not extend to any product 
which has been subjected to misuse, neglect, accident, improper installation, or where the date code has been 
removed or defaced. QSC shall not be liable for incidental and/or consequential damages. This warranty gives 
you specific legal rights. This limited warranty is freely transferable during the term of the warranty period. 
Customers may have additional rights, which vary from state to state. 
 
In the event that this product was manufactured for export and sale outside of the United States or its territories, 
then this limited warranty shall not apply. Removal of the serial number on this product, or purchase of this 
product from an unauthorized dealer will void this limited warranty. 
 
Periodically, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please 
contact us at 800-854-4079 or visit our website at www.qscaudio.com.       

 

 

FCC INTERFERENCE STATEMENT

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

NOTE: This equipment has been tested and found to be in compliance with the limits for a class B digital device, 
pursuant to part 15 of the FCC rules.  
 
These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and 
used in accordance with to the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by switching the equipment on 
and off, the user is encouraged to try to correct the interference by one or more of the following measures: 
 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 

 

Consult the dealer or an experienced radio or TV technician for help. 

 

 

 

Summary of Contents for DCP 300

















Reviews: