QSC CMX2000V, User Manual

Page: 14 / 100

13 14
Speakon™ Outputs
CMX amplifiers offer a choice of output connections, with two NL4MD Speakon™ jacks and a terminal block connector. (Figure 28 through Figure
30)
The Speakon™ connector is designed specially for high-power speaker connections. It locks in place, prevents shock hazard, and assures the
correct polarity.
Each channel accepts a normal two-wire cable. In addition, Channel 1 accepts a four-wire cable. Channel 1 Speakon™ jack has both Channel 1 and
Channel 2 output signals
(Figure 29) , so it is especially useful for PARALLEL INPUTS, bi-amp, or BRIDGE MONO operation (see BRIDGE MONO
operating precautions on page 9). Channel 2 Speakon™ carries only the output from Channel 2.
For easier insertion, use the newer-style NL4FC Speakon™ connectors with quick-lock thumb latches.
Speaker Cabling
Larger wire sizes and shorter lengths minimize both loss of power and degradation of damping factor. Do not place speaker cables next to
input wiring.
WRRNRNG: To prevent electric shock, do not operate the amplifier with any of the conductor of the speaker wire exposed.
Two channels, two Speakon™ connectors using two wires each.
(STEREO, bi‑amp, or PARALLEL INPUTS mode)
Two channels, one Speakon™ connector using four wires
(STEREO, bi‑amp, or PARALLEL INPUTS mode)
BRIDGE MONO MODE
To Channel 1 speaker
To Channel 2 speaker
To Channel 1 speaker
To Channel 2 speaker
Channel 1
Channel 2
To speaker
— Figure 28 —
— Figure 29 —
— Figure 30 —