background image

1

2

IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLS

WARNING! 

1.  Read these instructions. 
2.  Keep these instructions. 
3.  Heed all warnings. 
4.  Follow all instructions. 
5.  Clean only with a dry cloth. 
6.  Install in accordance with QSC Audio Product’s instructions and local building codes. The installation should be done by a licensed 

installation professional.

7.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 
8.  Only use attachments/accessories from QSC Audio Products, LLC. 
9.  Use only with mounts or brackets supplied or specified by QSC Audio Products, LLC. 
10. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated 
“dangerous” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans. 

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance 
(servicing) instructions in this manual. 

WARNING! Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, cabinets, 
transducers, brackets and associated equipment for damage. Any missing, corroded, deformed or non-load rated component 
could significantly reduce the strength of the installation, placement, or array. Any such condition severely reduces the safety of the 
installation and should be immediately corrected. Use only hardware which is rated for the loading conditions of the installation 
and any possible short-term unexpected overloading. Never exceed the rating of the hardware or equipment. Consult a licensed, 
professional engineer when any doubt or questions arise regarding a physical equipment installation. 

Warranty (USA only; other countries, see your dealer or distributor)

Disclaimer

QSC Audio Products, LLC is not liable for any damage to amplifiers, or any other equipment that is caused by negligence or improper installation and/
or use of this loudspeaker product. 

QSC Audio Products 3-Year Limited Warranty

QSC Audio Products, LLC (“QSC”) guarantees its products to be free from defective material and / or workmanship for a period of three (3) years from 
date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation and 
use - provided the unit is returned to our factory or one of our authorized service stations via prepaid transportation with a copy of proof of purchase (i.e., 
sales receipt). This warranty provides that the examination of the return product must indicate, in our judgment, a manufacturing defect. This warranty 
does not extend to any product which has been subjected to misuse, neglect, accident, improper installation, or where the date code has been removed 
or defaced. QSC shall not be liable for incidental and/or consequential damages. This warranty gives you specific legal rights. This limited warranty is 
freely transferable during the term of the warranty period. Customer may have additional rights, which vary from state to state. 

In the event that this product was manufactured for export and sale outside of the United States or its territories, then this limited warranty shall not apply. 
Removal of the serial number on this product, or purchase of this product from an unauthorized dealer, will void this limited warranty. 
Periodically, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please visit www.qscaudio.com. 
Contact us at 800-854-4079 or visit our web site at www.qscaudio.com. 

© Copyright 2010, QSC Audio Products, LLC 
QSC

®

 is a registered trademark of QSC Audio Products, LLC 

“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office 
All trademarks are the property of their respective owners. 

Summary of Contents for AD-C series

























Reviews: