background image

EN

Attaching the Feet

Locate the four M6 attachment points on the bottom of the sub. Consult the following illustrations and pay careful attention 

to which attachment points are correct.

Installation Options

The AD-S28Tw has been designed for installation flexibility. The subwoofer may be mounted using a number of different 

suspension techniques, as well as being easily shelf or floor mounted. The QSC logo on the grille is rotatable to accommo-

date horizontal or vertical orientation. While low frequency products do not have directional dispersion characteristics, all of 

the sonic energy produced by this subwoofer exits the cabinet through the port due to the ported bandpass design. For that 

reason, the port (located behind the grille) 

mUSt NOt 

be physically blocked by anything, and should not be placed within 

twelve (12) inches of any objects larger than 3 to 4 inches (75 to 100 mm).

When the subwoofer is floor or shelf standing it is recommended that the rubber feet be attached.

For suspended installations, the enclosure can be attached with flypoints or the included yoke bracket. The enclosure can be  

oriented in multiple positions when suspended:

Remove the screws from the selected attachment points using a #2 phillips-head screw driver or electric driver. Remove only 

the four screws for the attachment of the feet. 

DO NOt REmOVE ANY OtHER SCREWS.

 If a screw hole is left open, it 

will create an airleak which will cause noise and compromise the performance of the cabinet.

Screw the rubber feet into the attachment point. It should not require significant force to rotate the foot if the threads are 

properly engaged. If the foot is not screwing in easily, remove it and engage it in the threads again.  

 

Do not use any tools for installation of the feet. the rubber may be damaged if a tool is used.

Continue rotating the foot until it makes contact with the cabinet. Only hand generated force is necessary to properly seal 

the hole and keep the foot screwed in.

Once the feet are attached, place the subwoofer in the desired location.  

4

Summary of Contents for AcousticDesign AD-S28Tw













Reviews: