22
©
Copyright 2018 QSAN Technology, Inc. All Rights Reserved.
When you remove the controller from the system chassis, the sensitive
internal components are exposed. Please avoid touching anything other
than the memory module when you add or remove a memory module.
3.
Insert a new memory module into the slot.
Push the retaining clips on the slot out to the sides.
Align the notch on the gold edge of the module with the notch in the memory slot.
Push down on the memory module with firm and even pressure. The retaining clips
will snap into position as the module is correctly inserted.
4.
Put back the controller you removed in step 2.
Align the controller with the chassis, then gently push the controller all the way to the
back.
Push back and release lever then fasten the screws on the back of the XCubeNAS.
