23
5.
Remove memory module.
Follow step 1 and 2 above to shut down your XCubeNAS, and disconnect the cables,
and then remove the controller.
Disengage the memory retaining clips by pushing them outwards, and the module
will pop out of the slot.
Follow step 4 above to put back the controller.
The following table is the suggested installation combination for memory.
Table 3-2
The Suggested Installation Combination for Memory.
Slot #1
Slot #2
Total Memory
4GB
4GB
8GB (Default)
8GB
8GB
16GB
16GB
-
16GB
16GB
16GB
32GB
32GB
-
32GB
32GB
32GB
64GB
CAUTION:
To ensure the system stability, you MUST install genuine QSAN memory
modules for system memory size expansion.
INFORMATION:
(1)
If you want to purchase the optional memory, please contact your
nearest local reseller or visit QSAN official website:
(2)
See the recommended memory module from the QSAN official
website: