9
3.
Install the System Hardware
This chapter will show you the procedure of the XCubeNAS hardware installation and initial
configuration.
3.1.
Install the Disk Drive in the Tray
3.1.1.
Tools and Parts for Drive Installation
At least one 3.5” or 2.5” SATA drive (please visit
www.qsan.com
for compatible drive
models).
A screwdriver (Phillips #1, for installing 2.5” SATA drive on LFF only)
.
CAUTION:
Please ensure that there is no data on the disk to prevent important data
being formatted
3.1.2.
Install the Disk Drive (LFF)
1.
Open the drive tray.
①
Push to release the carrier handle.
