3.
Click the
SAS Zoning
tab to view all available SAS ports and disk drives.
4.
Check or uncheck the disk drive slots to join in the SAS port. The disk drive slots are all
checked by default.
5.
Click the
Apply
button to apply the SAS zoning settings.
Figure 3-3
SAS Zoning Configuration
TIP:
Please note that after applying new SAS zoning configuration, you must
reboot the XCubeDAS system to make new zoning configurations take
effect.
After restart the XCubeDAS system, server that connected to the SAS port can only detect
and access designated the disk drives according to new SAS zoning configuration. We take
some SAS zoning examples for your reference.
All SAS Ports Access All Disk Drives
The default zoning setting is that all ports can access all drives in the XCubeDAS system.
