background image

4. See the diagram below to determine the meaning of the lights and indicators on the front of the system.

TIP:

Please wait for the controller status LED to turn green on the rear of the chassis before attempting to discover or manage the storage system.
It may take a few minutes to boot the XCubeSAN system.

  5

     

 POWER ON THE STORAGE SYSTEM

Connect the Power Cables

1. Connect power cables from each power supply module to a power source.
2. Make sure to secure the power cables the power supply modules so they can not be pulled out accidentally.

Power on the System Components

1. Power on any network switches, routers, or other standalone components.
2. Power on any expansion enclosures that might be a part of the system.
3. Power on the XCubeSAN system by pressing the power button on the front of the system.

Power Cord
Conncctor (left)

Power Cord
Conncctor(right)

Pull the inner rail out and slide the intermediate member back.

Install the inner rail onto the chassis.

Insert the chassis to complete the installation.

Rear Bracket

Front Bracket

Note : Please repeat the installation steps for the other side.

  6

     

 DISCOVER AND SETUP THE SYSTEM

Discover the System

The default setting for the management IP address is DHCP. We provide the QFinder Java utility to search for QSAN products on the network and aid 
quick access to the login page of the SANOS web interface.

QFinder Utility

To download QFinder, please visit: 

https://qsan.com/QFinder

QFinder is a Java based program. To execute this program, JRE (Java Runtime Environment) is required. You can visit the following website to 
download and install JRE: 

http://www.java.com/en/download/

After JRE is installed, run the QFinder.jar program. The SAN storage system in your network will be detected and listed in the table.

Select the system you are looking for. Double clicking the 
selected entry will automatically bring up the browser and 
display the login page.

TIP:

If the LAN doesn’t have a DHCP server, the management port will be 
assigned a fix IP address: 169.254.1.234/16. So you can configure the IP 
address of your management computer to the same subnet domain of the 
storage system, e.g.: 169.254.1.1/16. Then open a browser and enter 
http://169.254.1.234 to go into the login page.

1

2

4

Install the outer rail / bracket assembly to the frame.

3

Step 1. Pull the middle rail fully extended in locked position.
Step 2. Ensure ball bearing retainer is located at the front of the middle rail.
Step 3. Insert chassis into middle-outer rail.
Step 4. When hit the stop, pull / push release tab to unlock and retract chassis into rack.
Step 5. Use M5x20 screws to fasten the chassis ear.

1. System Power Button / LED 

4. System Status LED

2. UID (Unique ldentifier) Button / LED 

5. USB Port

3. System Access LED 

1

2

3

4

5

Summary of Contents for XCubeSAN

Page 1: ... C2F SP128G Rail kit model name SLR RM3640 USB LCM module model name LCM U162 Prepare for Installation Before installing your storage system it is highly recommend that you follow our configuration worksheet which can be downloaded from the QSAN website https qsan com zk6ucs Record System Information on the Configuration Worksheet System name Admin password NTP server address Management IP address...

Page 2: ...r to tne QSAN XCubeSAN Hardware Manual for detailed instructions 1 Uninstall host card dummy bracket 2 Insert host card to host card slot 1 4 INSTALL THE OPTIONAL RAIL KIT The rail kit is an optional accessory for XCubeSAN series product If you have ordered the rail kit please follow the racking instructions below CAUTION The populated XCubeSAN system can be very heavy to avoid any potential injur...

Page 3: ...SAN products on the network and aid quick access to the login page of the SANOS web interface QFinder Utility To download QFinder please visit https qsan com QFinder QFinder is a Java based program To execute this program JRE Java Runtime Environment is required You can visit the following website to download and install JRE http www java com en download After JRE is installed run the QFinder jar ...

Page 4: ...figuration wizard will guide the first time user to initialize and setup the system quickly Host Configuration and Storage Management After initial setup the next step is to configure the specific storage settings for your requirement For more information about managing the storage please refer to the XCubeSAN SANOS User s Manual which can be downloaded from the QSAN website https qsan com u4bb2s ...

Reviews: