Qsan Technology XCubeSAN XS5224D, Hardware Manual

Page: 53 / 143

Installing the System Hardware
33
Installing a Disk Drive into a Tray
Following contents and figures are detail steps of installing a disk drive into the tray.
 For installing an LFF disk drive into an LFF tray
。
Place a disk drive tray onto a stable surface.
。
Align the disk drive to the tray (with disk connector facing away from carrier handle)
and align four disk drive tray screw holes located on both sides of the hard drive
。
Install and tighten all four screws to secure the disk drive within the tray.
Figure 3-6 Align a Disk Drive & Install into a Tray (LFF-to-LFF)
 For installing an SFF disk drive into an LFF tray
。
Place a disk drive tray onto a stable surface.
。
Align the disk drive to the tray with the connector facing away from the carrier
handle.
。
Align four disk drive tray screw holes (front row at the bottom side of the tray for
SAS interface disk drive; a rear row for SATA interface SSD) to the disk drive.