15 Function Instruction
Function Instruction 14
Using this function can set your privacy and prevent disturbance from others
or matching with the code of other radios.
Operation steps are as follows :
1. Under full frequency mode, press "F+3" key cycularly to choose CTCSS or
DCS.
Press "F+3" key cycularly Close CTCSS The LCD displays:
Press "F+3" key cycularly CTCSS The LCD displays:
Press "F+3" key cycularly DCS The LCD displays:
2. Transmitting CTCSS/DCS, letter T in LCD flashing, press Key A or Key B to
choose the frequency. Press key EXIT to standby.
This function can choose the step frequency you want to set.
Operation steps are as follows :
1. In frequency mode, press "F+4" key to enter step frequency. The LCD
displays:
Function Instruction
Ｎｏｔｅ：
Details see attached CTCSS list.（P21-24）
Transmitting CTCSS
Step frequency
2. Receiving CTCSS/DCS, letter R in LCD flashing, press Key A or Key B to
choose the frequency. Press key EXIT to standby.
Ｎｏｔｅ：
Details see attached CTCSS list.（P21-24）
Using this function, you may set different receiving and transmitting frequencies.
In general, it is used for repeater.
Operation steps are as follows :
1. In frequency mode, press "F+6" key cycularly to choose plus
frequency or minus frequency.
Slip frequency pattern：1. Plus frequency, the LCD displays:
2. Minus frequency, the LCD displays:
3. Close frequency offset, the LCD displays:
Using voice prompt will be more convenient for users to setup.
Operation steps are as follows :
1. In channel mode, press "F+5" key cycularly to choose voice prompt ON/OFF.
Function Instruction
Ｎｏｔｅ：
You should set different frequency deviation according to the repeaters
selected. This function is invalid in channel pattern or frequecy pattern.
Frequency offset direction setting
Voice prompt
2. Enter step frequency, then press key”4” to choose the step frequency.
You can set 6.25/5/10/12.5/25.0KHZ step frequency.
3. After setting, press key EXIT to standby.
