Page 13
Presto Digitation Installation Manual
M I D I F
U N C T I O N S
MIDI
By pressing the MIDI button, we can edit the various MIDI functions, starting with
selection of the communication channels for receiving (rx) and transmitting (tx) data.
TX/RX Function
Operation is simple: Press Receive or Transmit, depending on whether you want to
select a channel for receiving or transmitting data. The relative LED will light up. At
this point, give the channel a number by pressing the appropriate key on the keyboard,
referring to the number markings.
Note:
If the button marked OMNI ON is pressed, the instrument can receive on any
channel. If the OFF button is pressed, it doesn't transmit or receive any MIDI
information
PG Function
With this button, a program change code can be manually sent to one of the external
unit's regardless of the mode set-up status explained below. The procedure is similar to
the above. Each key is assigned a program change number, so to send PG No. 4, for
example, we have to press (in this order):
-MIDI button (To enter MIDI Edit.)
-PG button (The LED will light up.)
-The first C on the left of the keyboard, which is the fourth key and corresponds to PG
No. 4 (At this stage the PG LED will go out, confirming that selection has been made.)
If we are satisfied with the selected sound, we press the MIDI button again to exit
Editing and return to Play. If not we repeat the same operations in the above order to
select another program change.
Ac. Bass
El. Piano 1 El. Piano 2
Pipe
Vibes
Strings
El. Bass
Piano 1
Piano 2
Piano 3
Harpsi
On/Off
Presto-Digitation
Hall
Stage
Room
Ambience Transposer
Demo
Chorus
Flanger Tremolo
Rotary Dyn Sens
MIDI
Min
Max Mellow
Bright
Min
Max Min
Max
Master Volume
Brilliance
Strings Volume
Effects Parameters
TX
RX
PG
CC
MODE
MIDI
