QRS 70050A User Manual Download

Page: 15 / 52

QRS PNO

User Guide

QRS Music Technologies, Inc.

Technical Support - 800-247-6557

www.qrsmusic.com

Both PNO

AND the Piano’s Wi-Fi device must be programmed to change modes.

Stand Alone

Mode:

192.168.1.1

NOT connected to the Internet.
PNO

is its own wireless network QRSPNO_2GEXT.

PNO

hands out IP addresses to your devices that are logged into it, Android, IOS...

PNO

delivers control for Android, Google Chrome or Safari web browsers.

Connect to PNO3 by entering

192.168.1.1

in the address bar of the web browser.

How to Configure Stand Alone Mode

Using the

Net gear Extender EX6100 / AC750

[

iPad

Example]

Netgear EX6100/AC750

PNO3 Stand Alone mode programming Steps

1. Flip the “Access Point/Extender” switch to the

“Access Point” position.

2. Plug the Extender into an outlet - wait for the

Power LED to turn green.

3. Use a paper clip to Press and Hold the “Factory

Reset” Button until power light flashes 3 times
(~10s)

The reset EX6100 will broadcast two SSID names;
EX6100_Netgear...2GEXT & 5GEXT (

You may

want to turn the Wi-Fi OFF and then ON to refresh
the Wi-Fi list.)

Go to your device’s Wi-Fi settings and Select
“EX6100_Netgear_2GEXT”.

6. The Netgear “genie” should appear within one

minute. Or, go to your web browser - Safari or
Chrome & enter:

www.mywifiext.net

7. A splash screen will appear stating device is set

to Access point, wait a moment and Configura-
tion Screen will appear

8. Select “No” on the configuration screen, then the

“Next” button, A pop up asking you to confirm
manual setup. Select OK

9. Authentication

Required Pop Up will appear

Enter username: “admin“ and “password” as the
Password then select “Log In” button.

Summary of Contents for 70050A





















































Search results

Summary of Contents for 70050A

Reviews:

Related manuals for 70050A

Brands by name

Popular brands

QRS 70050A, User Manual

Search results

Summary of Contents for 70050A

Reviews:

Related manuals for 70050A

Brands by name

Popular brands