For Technical Support Call 1-800-247-6557
Petine V
69_1
Q R S M U S I C T E C H N O L O G I E S , I N C .
P
AGE
5
Powering ON Petine for the First Time
Using the remote control, press STOP to halt play.
The source cannot be changed if the unit is in play mode.
Available Sources
You can choose any one of these three options to select a source.
1 cd
= CD Drive
2iN
= Internal Music
3cF
= CompactFlash
4Av
= Auxiliary Input
5Ni
= MIDI
6rc
= Record
1
Repeatedly tap the SOURCE button to cycle through the source list.
Stop tapping when the desired source displays.
2 Tap the SOURCE button, then immediately the number button associated with the desired source.
3
Tap the SOURCE button and then immediately tap the <<TRACK>> buttons, repeatedly, until the
desired source displays
Changing Sources
[CD-Internal-CompactFlash-Auxiliary-MIDI-Record]
Point the remote control at Petine’s IR sensor and press the POWER button.
Please wait for about 20 seconds for Petine and Pianomation to power on.
See page 39, “
Power On Sequence
” for the Petine serial number and other system information.
Petine may power on to any one the following sources:
If you’re not certain which source is currently selected, tap the SOURCE button to display the Source #.
Source # Display
Source Name
Description
Page
Internal
Press PLAY on the remote to play through the 24 Internal pre-installed songs.
6
CD
Press PLAY on the remote to play tracks 1 through “XX”
“
C
” indicates the CD Source and “XX” indicates the total number of songs.
8
CD
“
saL
” indicates the CD Source with a QRS SyncAlong Series CD inserted.
Petine is waiting for you to enter the SyncAlong access code.
“Play a QRS SyncAlong Series CD”
.
9
or
CD
or
CompactFlash
Three numbers “XXX” or a “
P01
” indicate recognizable music files on either the
CD Source or the CompactFlash Source.
“Play from the CompactFlash Source”
“Play MIDI & MP3 Files from CDROM or CompactFlash”
7
13
Auxiliary
“
AMI
” with a flashing dot indicates that the Auxiliary Source is active.
Petine is waiting to receive a signal into its rear panel’s “Line In” jack.
“Play Non-SyncAlong QRS CDs From Your Own CD player”
.
STOP on the remote must be pressed before changing to another source.
23
MIDI
Either of these two displays would indicate the MIDI Source is active.
Use to trigger General MIDI Sounds or play Petine from an external MIDI device.
To play from this source requires an optional MIDI Adapter Cable and jumper.
STOP on the remote must be pressed before changing to another source.
15
22
Record
Requires the optional PNOscan Record system, MIDI Adapter Cable and jumper.
14
X X X
0 2 4
P 0 1
C
X X
A M I
S A L
r P 1
- - -
- 0 1
2 i n
1 c d
1 c d
1 c d
3 c F
4 A v
5 n i
6 r c
Power
Button
