QRPKits KD1JV, Manual, Page: 4 / 20

5 2N7000 MOSFET TO-92
1 IRF510PBF Power mosfet TO-220
1 78L05 5V, 100 ma regulator
2 1N4148 SS diode
2 1N5231B 5.1V zener
1 1N4756B 47 V 1W zener
1 1N5817 1A shottky diode
2 SA612A or SA602 8 pin DIP mixer/osc
1 LM358N 8 pin DIP dual op amp
2 LM386N 8 pin DIP Audio amp
1 74HC4053N 16 pin DIP multiplexer
1 ATTINY13A 8 pin DIP Atmel processor Programmed
5 8 pin DIP socket
1 16 pin DIP socket
1 FUSE 2.5A PTC 652-MFR250-0-010-LF
6 9.000 MHz, series HU-49US crystal matched
1 FT50-42 Black, Ferrite core, large
1 FT37-43 Black, ferrite core, small
2 T50-2 Red powered iron core
1 T50-7 White powered iron core
1 2.1 mm Power Jack, PC mount
2 Stereo panel jack
1 BNC panel jack
1 TO-220 insulator Mica
1 #4, 1/2” Nylon screw
1 #4 nut for above
1 Main PCB
1 Case, top
1 Case, bottom
1 Red film
2 Small knob
1 Large knob
1 Tilt stand bale
2 Bale mounting blocks
4 Rubber feet
7 # 4-40 1/4” pan head screws
2 # 4-40 1/4” flat head screws
3 2 feet Insulated hook up wire, #24 Black – Green – Red wires.
1 5 feet #24 magnet wire
SurvivorB1_20171113
4