How to test the shock function
1.
Use the
TEST LIGHT
attach on the both side of
Electrodes (Metal).
2.
Press Shock Button, the
TEST LIGHT
will blink or
keeps on.
How to use the transmitter
Press
Vibration Button
on the transmitter (located in the middle of the
transmitter), the Orange and Red LED Indicated Light on the transmitter will stay
on.
Button 1- 6
are Shock Button for the Receiver. (Decrease in static shock which
the
1 Button is the strongest static shock
). The Orange Indicated Light will on
when you press the Button 1-3, the Red Indicated Light will on when you press
the Button 4-6.
The receiver will get into the
SAVE MODE
if you do not use it for 2 minutes and
there is no LED light on the receiver. Please
gently
shack it, it will be back to the
STANDBY MODE.
How to change the battery
Please replace the battery when there is no LED Indicated light on the
transmitter when you press any button on the transmitter.
Please replace the battery when there is no LED Indicated light on the Receiver.
How to re-set/re-pair Receiver with Transmitter
The Training System might stop working if the receiver lost the code with Transmitter.
Please re-set/re-pair the receiver with transmitter.
1.
Make sure the transmitter is power on
2.
Put the battery into the receiver.
4
