IP Sharing User’s Manual
1. Select a network interface card (NIC).
2. Input the IP Sharing’s address
(192.168.1.1).
(If your computer’s IP address is the on
the same subnet as the IP Sharing
(192.168.1.x), you will not connect to
Internet.) The IP address can be any
number from 2 to 254 that is not used
by any device. The gateway address is
not required to change.
）
3. Input a password (admin (default)).
4. Click “OK”.
1
2
3
4
Note: If you cannot find the IP Sharing due to a problem in the IP settings, push and
hold the “Restore” button over five seconds to restore factory default settings.
1.6 Administration Interface
After successfully logging in, you will see the administration interface (also named “UI”)
as shown below.
Very Important: After entering data on any page, remember to click the “Apply”
button to save the settings. If you click ay other option, you will be directed to
the page you clicked and lose your new settings!
7
