2/4
• Pull crown out to 1st. click position.
• Pull crown out to the 2nd click position when
the second hand is at the 12 o'clock position.
Note: When the crown is in the second click position.
Do not press any buttons. Otherwise the chronograph hands
will move
• Push crown back to normal position.
• Turn the crown clockwise until the previous day’s
date appears.
Note: Do not set the date between 9:00 PM and 1:00 AM.
Otherwise, the date may not change properly.
• Turn to set the hour and minute hands.
• Turn clockwise to advance the hour and
minute hands past 12:00 AM. Doing so will
advance the date to the current date.
• Set the hour and minute hands to the desired
time taking AM or PM into consideration.
Recommended:
• Do not set the date between 9:00 PM and 1:00 AM.
Otherwise, the day may not change properly.
If it is necessary to set the date during that time period, first
change the time to any time outside it, sett the date and then
reset the correct time.
• When setting the minute hand, first advance it 4 to 5
minutes ahead of the desired time and then turn it back to
the exact minute.
Movement Instructions Manual
How to set time and date:
Before setting the time, check if the stopwatch second and minute hands are at the “0” position (12
o’clock). If the stopwatch is in use, press the button in the following order to reset it, and then, check if the
hands return to “0” position.
PANSAR SWEDEN AB
mässvägen, 125 30 Älvsjö, Sweden
