Qorvo QPB7432, User Manual, Page: 8 / 9

QPB7432
Optical to Electrical Receiver User Manual
Optical Receiver User Manual
– Rev 02, Aug 12, 2018
- 8 of 9 - www.qorvo.com
®
Optical to Electrical Receiver Application Specifications
Parameter
Condition
(1)
Min Typ Max Unit
Supply Current (I
DD
) Steady state operation 160 mA
Frequency Range 47 1218 MHz
Optical Gain At 550MHz. O/E gain is defined by 20*log (Zt/75) 44.5 dB
Gain Flatness ±1.5 dB
Tilt
Linear tilt from 45 – 1218 MHz; higher tilt can be
achieved by changing components
6 dB
Equivalent Input Noise 3.5
pA / √Hz
RF Output Level at
547.25 MHz
RF Output Level at 547.25 MHz
+14 dBmV/ch
At 45 MHz −17
dB
Output Return Loss
At 600 MHz −15
dB
At 1218 MHz −18
dB
MER
90MHz to 850MHz, 0dB tilt, 96 channels, 8MHz
spacing. ITU-T Annex A 256 QAM 6.952
Msymbols/s. OMI = 3.5%
32 dB
BER 2.0E-5
Gain Control Range Using suggested application circuit 30 dB
Notes:
1. Typical performance at these conditions:
Temperature
=+25 °C, V
DD
=+5
V, Optical Input to Electrical RF Out - Receiver reference design
Optical Input Requirements
Parameter Unit Min Typical Max
Optical Input Power dBm
−18
0
Optical Modulation Index (OMI) % / ch (79ch) 3.5
1550 nm PIN Responsivity
mA/mW 0.95
1550 nm PIN Capacitance
pF 0.35