QM33120WDK1 UG Rev. A, July 2022
Subject to change without notice | All rights reserved
7 of 11
QM33120WDK1
USER GUIDE
®
7 QorvoOne GUI
The nRF52840 DK boards are shipped preprogrammed. So, you can connect the two nRF52840 DK boards to the PC using the supplied
USB cable. Make sure that the antennas face each other during the evaluation.
Figure 5 : AoA System Evaluation Setup
Install QorvoOne GUI software included in QM33_QorvoOne_DK package and start the application.
The boards will be detected and displayed on the main screen.
For AoA evaluation, ensure that the QM33120WEVB (the one with the dual antenna) is configured as initiator.
Refer to the
QM33120WDK1 Quick Start Guide
for further information.
