Qomo QIT1455, User Manual, Page: 26 / 30

24
Built-in PC Operation
1.
Select PC signal source to enter PC interface. The following are three ways to select a signal source channel.
 Swipe your finger up from the bottom edge to bring up a toolbar then click input .
 Press SOURCE button on the remote control.
 Press button on the front control panel.
In the signal source page, select a channel and press OK or click the channel icon directly to enter it.
2.
Operate the built-in PC in the same way as you operate an ordinary computer.
3.
Shut down PC before you turn off the panel. Do not power off a running PC suddenly to avoid data lose. Or you
could also press Power button to turn off PC and panel at the same time.